The mechanical equipment such as sludge filter press often works well when it is in good condition. Therefore, it is very important to ensure the condition of the sludge filter press. But for companies that have no experience in using sludge filter presses, what details should be paid attention to when adjusting the sludge treatment effect, and from which aspects should they start? Generally, before construction, you should carefully check whether the sludge filter presses are connected It is firm, whether the operating contact of each component is good, if any abnormality is found, the repairer should be notified to repair it in time. If it is found that the action accuracy or insensitivity caused by electrical components is poor, it should be repaired or replaced in time. Secondly, the maintenance of the hydraulic system is mainly the inspection and maintenance of the hydraulic components and the sealing of each interface. If the sludge filter press is not used for a long time, the filter plates of the plate and frame filter press should be cleaned and discharged on the frame of the filter press. Dry the filter cloth after cleaning; the exposed parts of the piston rod and the integrated block should be coated with butter.
Finally, check the sealing surface of the sludge filter press from time to time to ensure that it is smooth and clean; before pressing, carefully inspect the filter cloth to ensure that the plate and frame filter press has no folds, damages, or slag inclusions to make it Smooth and intact to ensure the function of the filter press; the plate and frame filter press should always flush the filter cloth to ensure good filtrate penetration.