Newly purchasedPlate and frame filter pressA series of installation procedures are required before it can be put into use. Therefore, the installation of the plate and frame filter press is very important. The quality of the installation will directly affect the future use of the plate and frame filter press. Next, everyone will follow Su Dong to see what installation procedures the plate and frame filter press has.
1. Design the embedded hole according to the foot size provided by the supplier, and adopt the two-step grouting method.
2. There should be enough space around the filter press for easy operation and maintenance.
3. The plate and frame filter press should be placed horizontally on the floor, and the rear top plate should be fixed on the foundation with foot bolts. (Note: The bottom foot bolts generally only fix the rear top plate. Due to the pull dry, the pressure of the plate frame produces a certain downward bending. When the filter press works, the pull dry is straightened, resulting in a small displacement. Fix both ends at the same time, which may cause insufficient compression or damage to the rack.
4. The material and specifications of the filter cloth are determined according to the filtered material, pressure and temperature, and the appropriate filter cloth should be selected.
5. The plate frame is neatly arranged on the frame according to the requirements, and the processed filter cloth is neatly arranged on the filter plate. Pay attention to the correspondence between the feed hole and the rinse hole between the filter plates.
6. Connect the power to the plate and frame filter press and check whether it is normal. For mechanical transmission, check whether the forward and reverse rotation of the motor meets the requirements, whether the gearbox and oil cup of the machine head are filled with oil, and whether the screw and gear lubricating oil is well filled. Hydraulic transmission Check whether the gear pump is running normally, whether there is leakage in the hydraulic system, and whether the piston rod enters and exits smoothly.
Before you use the plate and frame filter press, you must install the plate and frame filter press according to the above requirements. If there is an error in the installation process, it will affect the maximum efficiency of the plate and frame filter press, and even have problems in the safety of use, so everyone must clearly remember the installation process introduced by Su Dong.