News
Home » News » technical knowledge » Three directions for abnormal noise of filter press motor

Three directions for abnormal noise of filter press motor

When the filter press is running, the motor will make a certain noise, but if you find that the noise is abnormal or too loud, you must be alert to whether the filter press has a problem. Sudong Chemical believes that you can investigate from the following three aspects:

1. The motor is aging and the load is too heavy;

2. The high-pressure oil pump is damaged. The high-pressure oil pump is generally a plunger pump. If the hydraulic oil is abnormal or has a long life, the plunger may be damaged;

3. When the hydraulic station is installed, the coupling is not concentric. If the coupling is not properly pressed, it will cause the motor to swing too much and increase the load.


The above three aspects are the troubleshooting directions for the abnormal sound of the filter press motor when in use. You can start the troubleshooting by yourself after the correct shutdown, and contact the professional for repair after confirming the fault. If the fault cannot be found, then hand it to the professional Be careful not to disassemble it at will.

News

Jiangsu Sudong Chemical Machinery Co., Ltd. was established in June 1956. It has been engaged in the research, design and manufacture of filter presses for more than 30 years.
 Top 10  brands of filter press in China
 Solid liquid separation engineering technology research center

MENU

PRODUCT RECOMMENDATION

CONTACT US

 : +86-18151163925
 : +86-0523-87791016
 : +86-18151163925
 : cmxkyy
 : chenmx@sdylj.cn
 :  www.sutonfilterpress.com
 : No.1, Sudong Road, Guxi Town, Taixing City, Jiangsu Province

Copryright  2021 Jiangsu Sudong Chemical Machinery Co., Ltd.