The working environment of the filter press is mostly humid and high temperature. These conditions will have some adverse effects on the equipment. On the one hand, the filter press manufacturer represented by Sudong Chemical Industry pays special attention to the design and manufacturer. Remind customers to pay attention to the maintenance of equipment.
The hazards of moisture to the hydraulic system have already been introduced by Sudong Chemical in the earlier stage, so let’s take a closer look at the hazards of moisture to the filter press control box today.
Damp moistureFilter pressThe first thing to bear the brunt of equipment damage is the equipment control box. Because there are a large number of circuits, control components, sensors and controllers in the control box of the filter press, when these are attacked by water, the equipment will not be sensitive enough, or the controller cannot be installed with pre-equipment. The operation of the program will cause the equipment to be completely paralyzed, and may even cause the circuit to be disconnected, so that other metals of the equipment are charged, which will cause casualties. Therefore, the biggest hazard of water to equipment is the control box with a large number of circuits.
In addition to the influence of water vapor on the control box, Sudong Chemical also reminds everyone to pay attention to the problem of line aging after the equipment has been used for a long time. This problem also has great safety risks. If you do not pay attention to it, you will encounter moisture problems. , The consequences may be serious.