The plate and frame filter press plays a prominent role in the industry's filtration process. You may not know that if the feeding speed is too fast during use, it is likely to cause the plate and frame filter press to malfunction. This is mainly due to the fast feeding speed. It will easily cause clogging of the filter press. Therefore, reasonable control of the feeding speed can make the plate and frame filter press work more smoothly.
Generally, in the filtration production line of the industry, the feeding speed of the plate and frame filter press at different stages is also different. When the plate and frame filter press is just beginning to filter press, the pulp in the filter press room is not too large. The thickness of the filter cake is not large. Therefore, a faster filling speed should be used to ensure that the plate and frame filter press can be filled in time and ensure that there is sufficient pressure in the filter press chamber. However, when the plate and frame filter press has been running for a period of time, the feeding speed should be slowed down, so as to avoid too much material, which may cause blockage of the plate and frame filter press.
Sudong Chemical reminds you that reasonable regulation of the feeding speed of the plate and frame filter press in the industrial production process can not only ensure the normal operation of the filter press, but also improve the working efficiency of the filter press to a great extent. The above guarantees the performance of the plate and frame filter press, which is very important and you should pay attention to it.