In the solid-liquid separation operation of the filter press, the filter plate is the part that is easy to fail. Among the common faults, the loosening of the filter plate and the oil leakage problem have a greater impact on the operation and operation, which will cause the pressure to be unable to maintain and the hydraulic cylinder to advance improperly. Today Sudong Chemical Let's analyze this problem for everyone.
Analysis of the reasons for the loosening of filter plate of filter press and even oil leakage
The hydraulic system of the filter press mainly provides pressure. When the oil cavity A is filled with more oil, the piston moves to the left, pressing the filter plate to seal it. When the oil in the oil chamber B increases, the piston moves to the right and the filter plate of the filter press is released. Due to the precision manufacturing, the hydraulic system of the filter press has fewer failures, as long as you pay attention to daily maintenance. Due to wear and tear, oil leakage occurs every year or so. At this time, the O-ring should be repaired and replaced. During regular maintenance, you can check the degree of wear and check the sealing ring to see if it needs to be replaced.
In the maintenance of the filter press, many parts are easily worn parts. For these parts, you should check the degree of wear regularly like the seal ring and replace them in time. In this way, many faults can be dealt with in the embryonic stage.