The filter plate and filter cloth on the filter press equipment are the most easily worn parts. In order to ensure the efficient operation of the filter press, Sudong Chemical believes that customers should master the basic filter plate quality identification methods. Here is a tip to share with you, to distinguish the quality of the filter plate of the filter press from the internal holes and depression depth.
The first is the hole inside the filter plate. Since the current filter plate is made of polypropylene by thermal processing, it is necessary toFilter pressThe original material of the filter plate can be used after heating, so the filter plate is easy to cause voids during the casting process. When such voids reach a certain space or quantity, the filter plate is not a qualified product.
Then the depth of the depression of the filter plate. The depth of the depression of the filter plate determines the workload of each gap cycle of the equipment (usually the depth of the filter plate is about deep, the greater the workload each time), but it is not as deep as possible, but the depth of the depression of the filter plate When the filter plate's ability to withstand the strong pressure is exceeded, the filter plate is easily broken or damaged, and it can even cause the filter plate to burst suddenly, which can harm lives.
Everyone must match the size of the original equipment in the process of purchasing filter plates. The length, width and thickness must be consistent. Secondly, the quality of the filter plates can be judged by combining the two points mentioned above to ensure that high-quality filter plates are purchased. Of course The easiest way to purchase filter plates is to contact the original equipment manufacturer to purchase original filter plates.