If noise occurs during the operation of the filter press, it may be an internal problem. To easily fix the noise, the staff of Sudong Chemical recommends starting with an internal inspection.
First of all, in the installation of the filter press, the filter press must be installed in the correct order when installing the filter press to ensure the stability of the plate and frame filter press, which can effectively reduce the noise problem in the operation of the plate and frame filter press. The working ground of the filter press should also be kept flat, and do not add an \"angle\" to the filter press.
Secondly, when the filter press is used, it is necessary to do a good job of lubricating the various parts of the equipment to effectively reduce the wear between the parts, extend the service life of the plate and frame filter press, and avoid the noise problem caused by the friction of the parts.
Finally, the staff should do a good job of overhauling the filter press in time, and tighten the loose parts in time to avoid the noise problem of the filter press due to the loose parts, and better guarantee the operating quality of the filter press.
In addition to considering the noise problem from the filter press equipment itself, some noise reduction methods can also be used in the working environment to avoid the working noise from affecting the surroundings, and at the same time quickly solve the noise problem caused by internal failures, and restore the filter press as soon as possible Normal use.