As the saying goes, a good start is half the battle. Everyone is usingPlate and frame filter pressThe first step is installation. If it is not installed properly, there is no guarantee for subsequent work. The installation of the filter press is not to place the filter press. You should pay attention to:
1. The plate and frame filter press should be installed on a flat concrete foundation. Before positioning, the installer needs to correct the verticality of the beam and the large plane of the thrust plate. It is easy to operate when unloading and the pedestrian passage should be unobstructed.
2. The frame of the plate and frame filter press must be kept level and diagonally corrected. The thrust plate is fixed with anchor screws, and the base end is not fixed and the foundation surface is kept smooth to ensure free displacement under stress.
3. Tighten the connecting screws on the rack, place the filter plate as required, and arrange the feeding, washing and draining pipelines.
4. During the installation of the plate and frame filter press, the frame and the filter plate should be hoisted with soft materials to avoid wear to the components.
The above four points must be kept in mind when installing the plate and frame filter press, and must not be installed at will, just as a component assembly. In short, the installation work in accordance with the above items can reduce the installation errors that cause the filter press to not work properly. If you have any questions in this regard, you can consult the staff of Sudong Chemical.